The SoundOff 380 Series Professional Remote Siren features 11 programmable outputs and an LED Arrow Indicator that displays Left Arrow, Right Arrow and Center Out. The 380 Series Remote Siren features Class D technology with high speed digital switching provides higher efficiency, less current draw & better reliability. The 380 Series Remote Siren features 8 programmable push buttons with 10 amps per output for on/off, arrow bar, lightbar, gun lock, auxiliary lighting, takedowns, alley lights, headlight & taillight flashers, trunk release or camera system control. The 380 Series Remote Siren features a Park Kill function that disables the siren upon placing the vehicle in Park or by closing the door so you don't have to waste any valuable time. The 380 Series Remote Siren features programmable Wail & Yelp plus 1 user selectable, programmable tone with Manual and Horn override button. The 380 Series Remote Siren is proudly Made in the USA and meets SAE J1849 and is CA Title 13 requirements. Covered by SoundOff's 3 Year No Hassle Warranty.

Features:

Class D technology with high speed digital switching provides higher efficiency, less current draw & better reliability.

Broadcast two tones at the same time with independent speaker outputs.

May be used with 1 or 2 speakers, each with 100 watt output.

High durability rubber membrane push buttons for maximum wear & tear.

Siren control with 4 push buttons with programmable Wail & Yelp plus 1 user selectable, programmable tone.

Dedicated Radio Rebroadcast (w/ LED indicator), Horn & Manual override buttons.

Easily view activated Arrow pattern with amber LED indicator.

8 programmable push buttons with 10 amps per output for:

• on/off
• lightbar
• takedowns
• alley lights
• arrow bar
• auxiliary lighting
• camera system control
• headlight & taillight flashers
• gun lock
• trunk release

Three position slide switch features 20 amps per output.

Mappable push buttons to slide switch allows user to program push buttons to turn on when slide switch is changed.

Diagnostic Indicator warns of over voltage, under voltage, over temperature and over current problems.

Park Kill feature disables the siren when the vehicle is in Park.

Two installation options for the Control Panel: bail bracket or a recessed mount (remove bracket).

Amplifier can be mounted in any remote location in the vehicle, such as the trunk.

Peel and Stick button labels included.

MODEL ETSA380R TECHNICAL SPECIFICATIONS

CONTROL PANEL

Voltage Range: 9 - 30 VDC

Current Draw: 100mA @ 12.8 VDC, 50mA @ 25.6 VDC

Standby Current: less than 20mA

Operating Temperature: -40º to +65º C

Arrow Control: Single Button (left, right, center out, off) w/ 5 amber LEDs indicate arrow mode

Radio Rebroadcast: Push button w/ LED indicator

Backlight: Green LED

Status LEDs: Red LEDs to show status of relay outputs & speakers

Lever Switch: 3 Position, Programmable Lever Switch

Push buttons: 8 Push buttons - Programmable for ON/OFF, Momentary, 8 Second Delay & Arrow Control

Communication Interface: 2 - RJ-45 for Serial Communications Connectors

Backlight: Green LED

Mounting: Bail Bracket (incl.) or Console Mount (flush/recess mount)

Dimensions: 6.9" length x 3.5" height x 1.2" depth (2" high to top of 3 position switch)

AMPLIFIER

Voltage Range: 10 - 30 VDC

Input Current: 9 amps @ 12.8 VDC input - 100 watt output, 18 amps @ 12.8 VDC input - 200 watt output

Operating Temperature: -40º to +65º C

Reverse Polarity Protection: 25 amp in line fuse

Output Power/Channel: 100 watts regulated output

Number of Channels: 2

Discrete Inputs:

• Backlight: 10 - 30 VDC
• Park-Kill, Horn Ring & Auxiliary (high side or low side activated): 10 - 30 VDC
• Radio Rebroadcast input

Protection: Yes - under voltage, over voltage & short circuit

Communication Interface: 2 - RJ-45 for Serial Communications Connectors

Connections: Molex Mini-fit JR 12 pin for discrete inputs & radio rebroadcast, Molex Mini-fit JR 4 pin for speaker outputs

Mounting: Surface Mount

Dimensions: 9" length x 3" height x 6" depth

RELAY

Voltage Range: 10 - 30 VDC

Input Current: 120 amps maximum:

Slide Switch - 50 amps, Push buttons 1-6 - 50 amps, 7-8 - 10 amps each

Operating Temperature: -40º to +65º C

Reverse Polarity Protected: Yes

Slide Switch Relays: Fused @ 20 amps/output

Push button Switch Relays (Fused @ 10 amps/output):

• 6 relays are +V output only
• 1 relay is dedicated Arrow Control
• 2 relays have external power input to allow for high side/low side activation and normally open or normally closed contacts

Communication Interface: 2 - RJ-45 for Serial Communications Connectors

Connections (Molex Mini-fit SR - Rated @ 50 amps/connection):

• 3 outputs for Level 1, 2 & 3.
• 2 outputs for Level 1-3 & Push buttons 1-6

SoundOff 3 Year No Hassle Warranty.